Aguila Ammunition, Revolver, 45LC, 200 Grain, Lead Flat Point, 50 Round Box

10 Gauge #4 Shot FLITECONTROL FLEX™ wad system works in both standard and ported turkey chokes for extremely consistent patterns. The high-quality copper-plated lead pellets are cushioned with an advanced buffering compound to provide dense patterns and ample energy to crush gobblers.

FLITECONTROL FLEX™ wad ensures dense patterns through both standard and ported turkey chokes
10-count pack

At just 1 3/4" long, the minishells let you load more shots into your Mossberg pump 12 gauge. The mini-shotshell offers less recoil for quicker on-target follow up shots and a quiet report. Aguila claims to be the only producer of a shotshell in this size. 7 1/2 shot. Pair with the Opsol mini-clip mossberg minishell feeder insert (see related products below) for SUPER reliability. Please note that the packaging has changed and now there are 25 Shells per box. Speed is rated at 1,175 FPS.

Twenty cartridges per box. Challenger Short shells allow you to fit more shells into your Mossburg 500 series pump action. Adding an OPSOL mini Clip is highly recommended for perfect feeding every time.

Ten cartridges per box. Shorty shells allow you to fit more shells into your Mossburg 500 series pump action. Adding an OPSOL mini Clip is highly recommended for perfect feeding every time. 15 #4 BUCK SHOT PELLETS running at 1200 FPS

Ten cartridges per box. Shorty shells allow you to fit more shells into your Mossburg 500 series pump action. Adding an OPSOL mini Clip is highly recommended for perfect feeding every time. 15/16 ounce of #8 shot running at 1145 FPS

Ten cartridges per box. Shorty shells allow you to fit more shells into your Mossburg 500 series pump action. Adding an OPSOL mini Clip is highly recommended for perfect feeding every time. 1 ounce RIFLED SLUG running at 1200 FPS

Hit your target and train harder with the proven line of American Eagle® handgun ammunition. It provides performance similar to self-defense and competition loads for a familiar feel and realistic practice.

Clean-burning powders
Federal® primers and brass
Wide selection of bullet styles to suit target practice

Train like never before with 224 Valkyrie and American Eagle rifle. The loads feature Federal(R) brass, clean-burning powder, consistent primers and accurate 75-grain TMJ bullets. They're the ultimate range ammunition for the ultimate MSR 15 cartridge.

Total Metal Jacket for a consistent, solid launch base. 3,000 FPS to match military and hunting loads. 

Ammo Incorporated, Revolver, 45LC, 250 Grain, Total Metal Coated, 50 Round Box

22 Long Rifle ammo by CCI
Copper plated Hollow Point
1,260 FPS
36 Grain
Varmint Control
Reliable feeding

At just 1 3/4" long, the minishells SLUGS lets you load more shots into your Mossberg pump 12 gauge. The minishell offers quicker on-target follow up shots. Slugs. Pair with the Opsul mossberg minishell feeder insert (see related products below) for SUPER reliability. 20 Shells per box. Speed is rated at 1,1250 FPS using a 7/8 ounce slug.

This kit essentially provides a conversion to 590S functionality, but in a more robust design. It contains our patent-pending Universal Cartridge Adapter and low-drag no-snag Magazine Follower which allows smooth cycling of 1-3/4" Minishells up to 3" Magnum cartridges in the same magazine. The adapter is constructed from vulcanized thermoplastic rubber, and the follower is machined from solid 6061-T6 billet aluminum. This kit is compatible with any Mossberg 12-Gauge pump-action firearm with a 3" Chamber and machined grooves in the receiver. Please refer to the picture below or the installation video below to confirm your firearm's compatibility.

5.56 Nato chambered, 16" assembled upper receiver with 12" Generation 1 fat Quad picatinny rail handguard. Barrels are QpQ nitride treated with carbine length gas system and a basic A2 muzzle brake. A very good basic upper receiver that Apache has been selling for years at or near the $295 price point. On sale now for $249.95

To add an optional Bolt Carrier Group and Charging handle, add for $80 by choosing the option below.

5.56 Nato chambered, 16" assembled upper receiver with 12" free floating Shark Mouth M-Lock style handguard. Barrels are QpQ nitride treated with carbine length gas system and a basic A2 muzzle brake. A very good basic upper receiver that Apache has been selling for years at or above the $299 price point. On sale now for $249.95*

*Photo shown with optional Bolt Carrier Group and Charging handle, add for $80 by choosing the option below.

From the manufacturer:

The Mini-Clip 2.0 Flex has the flexibility to accommodate a wider range of short shell lengths, should Aguila ever want to make an even shorter (or longer) Minishell.

Sale .223 5.56 Pistol Upper 4.75" barrel with Key Mod upper

Pure outdoor fun, for those who want the shortest upper receivers available, Apache Armaments presents their 4.75" fire-breathing uppers. Chambered in .223/5.56
Shown with optional charging handle
You may choose to add a bolt carrier and/or charging handle by selection from options for additional price.

Sale .223 5.56 Pistol Upper 4.75" barrel M Lock

Pure outdoor fun, for those who want the shortest upper receivers available, Apache Armaments presents their 4.75" fire-breathing uppers. Chambered in .223/5.56, these uppers are intentionally loud, obnoxious, and light up the area. They are more accurate than you expect.


Made with a 4.75" QpQ, nitrided barrel than has been manufactured to Apache Armaments' exacting standards.  Combined with an American made M4 flat top upper manufactured from 7075T aluminum and have your choice of a 4 inch key mod or M-Lock handguard.  This item you selected is M Lock. Finished off with an A2 style muzzle brake.  

5.56 Nato chambered, 16" assembled upper receiver with 12" monolithic M-Lock style handguard. Two short sections of removeable rail sections are included. Barrels are QpQ nitride treated with carbine length gas system and a basic A2 muzzle brake. A very good basic upper receiver that Apache has been selling for years at or near the $295 price point. On sale now for $249.95*

*Photo shown with optional Bolt Carrier Group and Charging handle, add for $80 by choosing the option below.

For increasing capacity in pump-action shotguns.

Federal, Shorty Shotshell, 12 Gauge 1.75", #8 Shot, 10Rd Box

At just 1 3/4-inch long, new Shorty shotshells offer similar patterns, energy and accuracy as full-size counterparts. 
1145 fps
#8 Shot
10 Rounds Per Box

For great cycling performance in Mossburg 590 and 88 series, add on a popular short-shell upgrade below

45 degree side folding back-up sights. You get both front and rear sights in this set. These allow you to use these quick sights when your scope or optic is in the way. Includes both close-up and long distance accuracy peep hole sight that change instantly. Fully adjustable for both windage and elevation. Blue for quicker acquisition and deployment.

This set is blue. To change to a discrete all black version with no logo, use the option selection below.

Apache .223 Wylde assembled upper receiver with 16" Stainless Steel straight fluted barrel, A2 muzzle brake and a 12" Lightning handguard. Caliber marked for user safety.

The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.

The Apache Armaments true match grade barrel is meticulously machined from USA sourced 416R Stainless Steel and features the .223 Wylde chambering. The Wylde chambering is a hybrid chambering developed by Bill Wylde to safely utilize 5.56 NATO ammunition while optimizing accuracy. Of course, it also safely chambers and shoots .223 Remington chambered ammunition as well. The barrel features straight line fluting in parallel to the bore axis for a slight weight reduction, increased surface area to enhance cooling and increase rigidity of the barrel.

The 12" Lightning handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections. The handguard is hard coat anodized for durability and good looks. It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.

Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function. Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .223 Wylde assembled upper receiver with 18" barrel, A2 muzzle brake and a 12" Lightning handguard.



Caliber marked for user safety.



The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance. Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.  These barrels have been manufactured to achieve sub MOA accuracy.  We have several customers reporting 3/4" groups at 100 yards right out of the box and 3/4" or better groups at 200 yards after recommended break in.


The 12" Lightning handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.


Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.



Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.


Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .223 Wylde assembled upper receiver with 18" Stainless Steel straight fluted match grade barrel, A2 muzzle brake and a 12" Lightning handguard.
Caliber marked and seen when both open and closed for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The Apache Armaments true match grade barrel is meticulously machined from USA sourced 416R Stainless Steel and features the .223 Wylde chambering.  The Wylde chambering is a hybrid chambering developed by Bill Wylde to safely utilize 5.56 NATO ammunition while optimizing accuracy.  Of course, it also safely chambers and shoots .223 Remington chambered ammunition as well.  The barrel features straight line fluting in parallel to the bore axis for a slight weight reduction, increased surface area to enhance cooling and thus maintain better bullet-to-bullet shooting accuracy, and increase rigidity of the barrel.  


The 12" Lightning handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks. It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.


Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .300 Blackout assembled upper receiver with 16" barrel, A2 muzzle brake and a 12" Lightning handguard.
Caliber marked for user safety.
The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.
The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel. It is finished with a manganese phosphate coating as per military specifications for corrosion resistance. Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.
The 12" Lightning handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections. The handguard is hard coat anodized for durability and good looks. It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.
Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.
Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .300 Blackout assembled upper receiver with 7.5" barrel, A2 muzzle brake and a 7" Shark handguard.

Caliber marked for user safety.

The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.

The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel. It is finished with a manganese phosphate coating as per military specifications for corrosion resistance. Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.

The 7" Shark handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections. The handguard is hard coat anodized for durability and good looks. It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.

Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.

Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.

Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 7.5" barrel, A2 muzzle brake and a 7" Skeleton handguard.

Caliber marked for user safety.

The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.
The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.
The 7" Skeleton handguard features two M-lock ports at the front end on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.
Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.
Of course, it is covered by the Apache Armaments limited lifetime warranty.  

Apache .300 Blackout upper receiver with 7.5" barrel, A2 muzzle brake and a 7" Bull Dozer handguard. We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
The 7" Bull Dozer handguard features two QD sling swivel ports on each side and M-lock ports on each side and the bottom to allow the user to mount accessories.
The handguard is hard coat anodized for durability and good looks.

Apache .300 Blackout upper receiver with 4.75" barrel, linear compensator muzzle brake and a 6.0" M-Lock handguard.  We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
It also features two M-Lock ports on each side and the bottom for accessories.  
Test fired and, of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 4.75" barrel, linear compensator muzzle brake and a 5.5" Skelton M-Lock handguard. We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver
It features two QD sling swivel ports on each side and two M-lock ports on the bottom allow the user to mount accessories.
Test fired and it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 10.5" barrel, A2 muzzle brake and a 9" Lightning handguard. We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
The 9" Lightning handguard features two QD sling swivel ports on each side and M-lock ports on each side and the bottom to allow the user to mount accessories.
The handguard is hard coat anodized for durability and good looks.
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 16.1" barrel, A2 muzzle brake and a 12” Lightning handguard.  We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
Caliber marked for user safety.   
The 12" Lightning handguard features two QD sling swivel ports on each side and M-lock ports on each side and the bottom to allow the user to mount accessories.   
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 8.5" barrel, A2 muzzle brake and a 7" Shark Mouth handguard. We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
The 7" Shark Mouth handguard features two QD sling swivel ports on each side and M-lock ports on each side and the bottom to allow the user to mount accessories.
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .308 Winchester assembled upper receiver with 16" barrel, A2 muzzle brake and a 12" Key Mod handguard.

Caliber marked for user safety.

The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.

The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel. It has been properly chambered and pressure rated to safely fire both .308 Winchester and 7.62x51 NATO ammunition. It is finished with a manganese phosphate coating as per military specifications for corrosion resistance. Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary. Even at the minimum legal length for a rifle barrel of 16 inches, these barrels have been manufactured to achieve sub MOA accuracy. We have several customers reporting 3/4" groups at 100 yards right out of the box and 1/2" or better groups after recommended break in.

The 12" free floating handguard features Key Mod ports on both sides and the bottom to allow the user to mount Key Mod dedicated accessories or picatinny rail sections. The handguard is hard coat anodized for durability and good looks.

Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.

Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .308 Winchester assembled upper receiver with straight fluted 18" barrel, A2 muzzle brake and a 12" Key Mod handguard.


Caliber marked for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel.  It has been properly chambered and pressure rated  to safely fire both .308 Winchester and 7.62x51 NATO ammunition.  .  The barrel features straight line fluting in parallel to the bore axis for a slight weight reduction, increased surface area to enhance cooling and increase rigidity of the barrel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.  These 18" barrels have been manufactured to achieve sub MOA accuracy.  We have several customers reporting better than 3/4" groups at 100 yards right out of the box and 1/2" or better groups after recommended break in.


The 12" free floating handguard features Key Mod ports on both sides and the bottom to allow the user to mount Key Mod dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.


Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .308 Winchester assembled upper receiver with Stainless Steel" match grade barrel, A2 muzzle brake and 15in Skeleton handguard.


Caliber marked for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The Apache Armaments true match grade barrel is meticulously machined from USA sourced 416R Stainless Steel.  It has been properly chambered and pressure rated  to safely fire both .308 Winchester and 7.62x51 NATO ammunition. These 22" barrels have been manufactured to achieve sub MOA accuracy.  We have several customers reporting better than 3/4" groups at 100 yards right out of the box and 1/2" or better groups after recommended break in.


The 15" free floating handguard features MLok ports on both sides and the bottom to allow the user to mount MLok dedicated accessories or picatinny rail sections. Apache's skeletonized handguards are lightweight and show the steel barrel's great looks.  The handguard is hard coat anodized for durability and good looks.   


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.



Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .308 Winchester assembled upper receiver with 22 inch Stainless Steel match grade barrel, A2 muzzle brake and 16.5 in Mlok handguard.


Caliber marked for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The Apache Armaments true match grade barrel is meticulously machined from USA sourced 416R Stainless Steel.  It has been properly chambered and pressure rated  to safely fire both .308 Winchester and 7.62x51 NATO ammunition. These 22" barrels have been manufactured to achieve sub MOA accuracy.  We have several customers reporting better than 3/4" groups at 100 yards right out of the box and 1/2" or better groups after recommended break in.


The 16.5" free floating handguard features MLok ports on both sides and the bottom to allow the user to mount MLok dedicated accessories or picatinny rail sections. Apache's skeletonized handguards are lightweight and show the steel barrel's great looks.  The handguard is hard coat anodized for durability and good looks.   


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.

Apache 5.56 Nato upper receiver with 7.5" barrel, A2 muzzle brake and a 7" Skeleton handguard.
Caliber marked when both open and closed for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The barrel is machined from 4150 high chromium, high vanadium steel, which is a higher grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for extra corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.


The 7" Skeleton handguard features two M-lock ports at the front end on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function. Of course, it is covered by the Apache Armaments limited lifetime warranty.


Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.


Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache 5.56 Nato upper receiver with 8.5" barrel, A2 muzzle brake and a 7.2" Contour Quad handguard.  
Caliber marked and seen when both open or closed for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.


The 7.2" Contour Quad handguard features  picatinny rails on all four sides of the handguard with a section in the middle of the handguard contoured out for a more comfortable gripping surface.  The handguard is hard coat anodized for durability and good looks. 


Like all Apache Armaments assembled upper receivers, only high quality parts are used, and each unit is test fired to assure function. 
 

Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments 6.5 Creedmoor assembled upper receiver with 20" barrel, linear compensator and a 17.5" Key Mod handguard.

Caliber marked for user safety.

The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.

The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel. It is finished with a manganese phosphate coating as per military specifications for corrosion resistance. Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary. These 20" barrels have been manufactured to achieve sub MOA accuracy. We have several customers reporting better than 3/4" groups at 200 yards.

The 17.5" free floating handguard features Key Mod ports on both sides and the bottom to allow the user to mount Key Mod dedicated accessories or picatinny rail sections. The handguard is hard coat anodized for durability and good looks.

The linear compensator drastically reduces perceived recoil and muzzle jump while only adding 1/4" of length versus the standard A2 brake. Additionally, it acts as a sound forwarder which reduces the noise level heard by the shooter and those next to the shooter.

Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.

Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments 7.62x39 complete upper half with 10.5" barrel, A2 muzzle brake and a 9" Lightning handguard with BOLT CARRIER GROUP. As the 7.62x39 utilizes a non-standard bolt face, we bundle the charging handle and bolt carrier group (BCG) into a complete upper half unit.
Caliber marked for user safety.
The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.
The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.
The 9" Lightning handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.
Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.
The charging handle is standard mil-spec.
The bolt carrier group is American made and machined from USA produced steel.  Every steel used in the Apache BCG exceeds the military specification for the component part of the BCG.  While competitors offer mil-spec BCG’s, all Apache BCG’s are better than mil-spec.
Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments 7.62x39 complete upper half with 4.75" Stainless Steel (SS) barrel, SS A2 muzzle brake and a 4" Key Mod handguard and includes BOLT CARRIER GROUP and charging handle. As the 7.62x39 utilizes a non-standard bolt face, we bundle the charging handle and bolt carrier group (BCG) into a complete upper half unit.
Caliber marked for user safety.
The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.
The barrel is machined from 416R heat treated Stainless Steel.
The 4" Key Mod handguard features Key Mod ports on both sides and the bottom to allow the user to mount Key Mod dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   


The bolt carrier group is American made and machined from USA produced steel.  Every steel used in the Apache BCG exceeds the military specification for the component part of the BCG.  While competitors offer mil-spec BCG’s, all Apache BCG’s are better than mil-spec.
Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.
Of course, it is covered by the Apache Armaments limited lifetime warranty.




Be on the lookout for our newest custom shorty upper in 4.5" barrel length that is currently in the testing phase.