Apache .223 Wylde assembled upper receiver with 16" Stainless Steel straight fluted barrel, A2 muzzle brake and a 12" Lightning handguard. Caliber marked for user safety.

The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.

The Apache Armaments true match grade barrel is meticulously machined from USA sourced 416R Stainless Steel and features the .223 Wylde chambering. The Wylde chambering is a hybrid chambering developed by Bill Wylde to safely utilize 5.56 NATO ammunition while optimizing accuracy. Of course, it also safely chambers and shoots .223 Remington chambered ammunition as well. The barrel features straight line fluting in parallel to the bore axis for a slight weight reduction, increased surface area to enhance cooling and increase rigidity of the barrel.

The 12" Lightning handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections. The handguard is hard coat anodized for durability and good looks. It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.

Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function. Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .223 Wylde assembled upper receiver with 18" barrel, A2 muzzle brake and a 12" Lightning handguard.



Caliber marked for user safety.



The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance. Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.  These barrels have been manufactured to achieve sub MOA accuracy.  We have several customers reporting 3/4" groups at 100 yards right out of the box and 3/4" or better groups at 200 yards after recommended break in.


The 12" Lightning handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.


Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.



Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.


Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .223 Wylde assembled upper receiver with 18" Stainless Steel straight fluted match grade barrel, A2 muzzle brake and a 12" Lightning handguard.
Caliber marked and seen when both open and closed for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The Apache Armaments true match grade barrel is meticulously machined from USA sourced 416R Stainless Steel and features the .223 Wylde chambering.  The Wylde chambering is a hybrid chambering developed by Bill Wylde to safely utilize 5.56 NATO ammunition while optimizing accuracy.  Of course, it also safely chambers and shoots .223 Remington chambered ammunition as well.  The barrel features straight line fluting in parallel to the bore axis for a slight weight reduction, increased surface area to enhance cooling and thus maintain better bullet-to-bullet shooting accuracy, and increase rigidity of the barrel.  


The 12" Lightning handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks. It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.


Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .300 Blackout assembled upper receiver with 16" barrel, A2 muzzle brake and a 12" Lightning handguard.
Caliber marked for user safety.
The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.
The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel. It is finished with a manganese phosphate coating as per military specifications for corrosion resistance. Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.
The 12" Lightning handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections. The handguard is hard coat anodized for durability and good looks. It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.
Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.
Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .300 Blackout assembled upper receiver with 7.5" barrel, A2 muzzle brake and a 7" Shark handguard.

Caliber marked for user safety.

The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.

The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel. It is finished with a manganese phosphate coating as per military specifications for corrosion resistance. Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.

The 7" Shark handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections. The handguard is hard coat anodized for durability and good looks. It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.

Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.

Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.

Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 7.5" barrel, A2 muzzle brake and a 7" Skeleton handguard.

Caliber marked for user safety.

The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.
The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.
The 7" Skeleton handguard features two M-lock ports at the front end on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.
Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.
Of course, it is covered by the Apache Armaments limited lifetime warranty.  

Apache .300 Blackout upper receiver with 7.5" barrel, A2 muzzle brake and a 7" Bull Dozer handguard. We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
The 7" Bull Dozer handguard features two QD sling swivel ports on each side and M-lock ports on each side and the bottom to allow the user to mount accessories.
The handguard is hard coat anodized for durability and good looks.

Apache .300 Blackout upper receiver with 4.75" barrel, linear compensator muzzle brake and a 6.0" M-Lock handguard.  We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
It also features two M-Lock ports on each side and the bottom for accessories.  
Test fired and, of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 4.75" barrel, linear compensator muzzle brake and a 5.5" Skelton M-Lock handguard. We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver
It features two QD sling swivel ports on each side and two M-lock ports on the bottom allow the user to mount accessories.
Test fired and it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 10.5" barrel, A2 muzzle brake and a 9" Lightning handguard. We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
The 9" Lightning handguard features two QD sling swivel ports on each side and M-lock ports on each side and the bottom to allow the user to mount accessories.
The handguard is hard coat anodized for durability and good looks.
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 16.1" barrel, A2 muzzle brake and a 12” Lightning handguard.  We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
Caliber marked for user safety.   
The 12" Lightning handguard features two QD sling swivel ports on each side and M-lock ports on each side and the bottom to allow the user to mount accessories.   
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache .300 Blackout upper receiver with 8.5" barrel, A2 muzzle brake and a 7" Shark Mouth handguard. We are including a Mil Spec charging handle and nitro carburized bolt carrier group (BCG) with this upper receiver.
The 7" Shark Mouth handguard features two QD sling swivel ports on each side and M-lock ports on each side and the bottom to allow the user to mount accessories.
Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .308 Winchester assembled upper receiver with 16" barrel, A2 muzzle brake and a 12" Key Mod handguard.

Caliber marked for user safety.

The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.

The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel. It has been properly chambered and pressure rated to safely fire both .308 Winchester and 7.62x51 NATO ammunition. It is finished with a manganese phosphate coating as per military specifications for corrosion resistance. Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary. Even at the minimum legal length for a rifle barrel of 16 inches, these barrels have been manufactured to achieve sub MOA accuracy. We have several customers reporting 3/4" groups at 100 yards right out of the box and 1/2" or better groups after recommended break in.

The 12" free floating handguard features Key Mod ports on both sides and the bottom to allow the user to mount Key Mod dedicated accessories or picatinny rail sections. The handguard is hard coat anodized for durability and good looks.

Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.

Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .308 Winchester assembled upper receiver with straight fluted 18" barrel, A2 muzzle brake and a 12" Key Mod handguard.


Caliber marked for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel.  It has been properly chambered and pressure rated  to safely fire both .308 Winchester and 7.62x51 NATO ammunition.  .  The barrel features straight line fluting in parallel to the bore axis for a slight weight reduction, increased surface area to enhance cooling and increase rigidity of the barrel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.  These 18" barrels have been manufactured to achieve sub MOA accuracy.  We have several customers reporting better than 3/4" groups at 100 yards right out of the box and 1/2" or better groups after recommended break in.


The 12" free floating handguard features Key Mod ports on both sides and the bottom to allow the user to mount Key Mod dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.


Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .308 Winchester assembled upper receiver with Stainless Steel" match grade barrel, A2 muzzle brake and 15in Skeleton handguard.


Caliber marked for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The Apache Armaments true match grade barrel is meticulously machined from USA sourced 416R Stainless Steel.  It has been properly chambered and pressure rated  to safely fire both .308 Winchester and 7.62x51 NATO ammunition. These 22" barrels have been manufactured to achieve sub MOA accuracy.  We have several customers reporting better than 3/4" groups at 100 yards right out of the box and 1/2" or better groups after recommended break in.


The 15" free floating handguard features MLok ports on both sides and the bottom to allow the user to mount MLok dedicated accessories or picatinny rail sections. Apache's skeletonized handguards are lightweight and show the steel barrel's great looks.  The handguard is hard coat anodized for durability and good looks.   


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.



Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache Armaments .308 Winchester assembled upper receiver with 22 inch Stainless Steel match grade barrel, A2 muzzle brake and 16.5 in Mlok handguard.


Caliber marked for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The Apache Armaments true match grade barrel is meticulously machined from USA sourced 416R Stainless Steel.  It has been properly chambered and pressure rated  to safely fire both .308 Winchester and 7.62x51 NATO ammunition. These 22" barrels have been manufactured to achieve sub MOA accuracy.  We have several customers reporting better than 3/4" groups at 100 yards right out of the box and 1/2" or better groups after recommended break in.


The 16.5" free floating handguard features MLok ports on both sides and the bottom to allow the user to mount MLok dedicated accessories or picatinny rail sections. Apache's skeletonized handguards are lightweight and show the steel barrel's great looks.  The handguard is hard coat anodized for durability and good looks.   


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.

upper 5.56 7.5in SS Kitty

Apache Armaments 5.56 Nato assembled upper receiver with 7.5" barrel, A2 muzzle brake and a 7" Shark handguard.
Caliber is marked to be seen when both opened and closed for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The barrel is machined from 4150 high chromium, high vanadium steel, which is a higher grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish (an even more durable finish) if necessary.


The 7" Shark handguard features M-lock ports on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks. It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.


Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.


Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache 5.56 Nato upper receiver with 7.5" barrel, A2 muzzle brake and a 7" Skeleton handguard.
Caliber marked when both open and closed for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The barrel is machined from 4150 high chromium, high vanadium steel, which is a higher grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for extra corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.


The 7" Skeleton handguard features two M-lock ports at the front end on both sides and the bottom to allow the user to mount M-lock dedicated accessories or picatinny rail sections.  The handguard is hard coat anodized for durability and good looks.   It also features a QD mounting point on each side near the upper receiver for those wanting to mount a sling in those areas.


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function. Of course, it is covered by the Apache Armaments limited lifetime warranty.


Upon customer request, Lightning handguards, Bulldozer handguards, Skeleton handguards and Shark handguards may be substituted interchangeably, if they are available.


Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.


Of course, it is covered by the Apache Armaments limited lifetime warranty.

Apache 5.56 Nato upper receiver with 8.5" barrel, A2 muzzle brake and a 7.2" Contour Quad handguard.  
Caliber marked and seen when both open or closed for user safety.


The upper is machined from 7075T aircraft grade aluminum and finished with type 3 hard coat anodizing as per military specifications.


The barrel is machined from 4150 high chromium, high vanadium steel, which is a better grade of steel than a standard gun barrel steel.  It is finished with a manganese phosphate coating as per military specifications for corrosion resistance.  Due to supply chain issues, we reserve the right to substitute the nitro carburized finish ( an even more durable finish) if necessary.


The 7.2" Contour Quad handguard features  picatinny rails on all four sides of the handguard with a section in the middle of the handguard contoured out for a more comfortable gripping surface.  The handguard is hard coat anodized for durability and good looks. 


Like all Apache Armaments assembled upper receivers, only high quality parts are used, and each unit is test fired to assure function. 
 

Like all Apache Armaments assembled upper receivers, only high quality parts are used and each unit is test fired to assure function.
Of course, it is covered by the Apache Armaments limited lifetime warranty.